Skip to content
DecoraMint

Skylight Shades: Fit, Light Control and Motorized Options

A shade made for an upright window may not stay put overhead. Identify the skylight model first, then choose the light control and between manual, solar or wired operation.

By DecoraMintPublished 5-minute readMore in Blinds & Shades

Rectangular skylight with a white frame set into a recessed ceiling opening
In this guide
  1. Find the model first
  2. Why an ordinary shade will not work
  3. Glow or darkness
  4. How you will reach it
  5. Heat and comfort
  6. Getting it fitted

The most common skylight-shade mistake is buying by the size of the hole in the ceiling. A skylight shade fastens to the skylight itself, usually into the frame of one particular model, and it has to hold its fabric flat overhead or on a slope where an ordinary shade would simply sag. So the first thing to find is not a fabric swatch but the label on the window.

Get that right and a skylight shade can change a room completely: a hard white square of noon glare becomes a soft, even glow over a kitchen table, or a bedroom finally stays dark past sunrise in June.

Find the model first

Look around the frame for a label, in a spot you can reach safely from the floor or a stable step ladder. Photograph it and record the full model, size code and any serial number, along with a wider photo of the opening. VELUX’s product-identification guide explains that its label identifies the model, glass type and manufacturing date, and says to find it before ordering accessories or service. Label positions differ between products and brands.

If you cannot find or reach the label, photos sent to the manufacturer or an installer will usually do. Never climb onto the roof or lean out of an open roof window to read a code.

The finished ceiling recess, often a deep drywall shaft, is usually larger than the skylight frame, and a roof window that opens within reach may take different accessories from a fixed skylight high in a vaulted ceiling. Measure only where the shade actually attaches. Older skylights may predate current accessories, in which case the choice is between a supported replacement and a custom system.

Why an ordinary shade will not work

A roller or cellular shade made for an upright window relies on gravity to hang straight. Tip it onto a slope or a flat ceiling and the fabric bellies downward. Skylight systems solve this with side channels, tensioning cords or guides that hold the fabric taut through its whole travel, so the installation drawing should show those parts and the quote should include them. Unless the maker specifically approves a shade for overhead use, do not mount a standard one sideways or upside down.

On a venting skylight, the shade also has to keep working with the sash open, without clashing with the screen, handle or opening motor.

Glow or darkness

Stand in the room at the time the skylight bothers you most. Glare on a laptop or worktop is a different problem from sun hitting a pillow at 5:30 a.m.

VELUX’s shade overview shows the range in one family. Its light-filtering shades soften and diffuse daylight, the look you want in a kitchen or living room where the skylight should still feel like a source of sky. Its room-darkening shades use an interior aluminum coating to block bright sun and are aimed at bedrooms. It also lists Venetian blinds for its roof windows, with slats that steer the direction of light as well as the amount.

Light-filtering fabric in a pale tone turns the opening into a lantern, glowing white on bright days and barely noticeable at night. A darker fabric looks like a crisp rectangle of shadow against a white ceiling, which suits a strong modern scheme but draws the eye. In a bedroom, the edges matter as much as the fabric, since even a thin line of light around the perimeter shows sharply against a dark ceiling; side channels that close those gaps are worth paying for.

How you will reach it

By hand or pole

A roof window within arm’s reach can use a simple manual shade. Higher up, manual shades are usually moved with a telescopic pole or rod that hooks onto the rail. Think about where you will stand to use it, whether furniture blocks that spot, and where the pole will live. A shade you have to stand on the bed to reach will mostly stay in one position.

Solar-powered

Solar shades carry a small panel and battery, so nothing has to be wired in. VELUX says its solar-powered room-darkening shades need no wiring at installation and that its skylight systems come with factory-paired remotes. Find out where the panel sits, whether trees or a north-facing roof will limit charging, and what battery replacement involves years from now.

Wired

A hardwired motor needs power routed to the opening, which means an electrician, possibly opened drywall and some patching, all of which belongs in the quote. Useful details to settle: whether the shade and a venting skylight motor share a remote, whether several shades can be grouped, and what extra hub any app or voice control requires.

A high skylight has one quiet advantage here. With a motor or a pole, there is no dangling cord at all, which is what the CPSC recommends where young children are present, since window covering cords can strangle them. Keep it that way: never add a pull cord or loop to bring an inaccessible shade within reach.

Heat and comfort

An overhead skylight takes a lot of direct summer sun, and a shade changes how much of it reaches the room. How much difference that makes to temperature or energy use depends on the glazing, fabric, fit and orientation, so if comfort is the main reason you are buying, look for test data on the exact skylight and shade combination. Avoid sticking foil, film or homemade insulated panels onto the glass without the maker’s approval, and keep vents, handles and moving parts clear.

Getting it fitted

Fix any leaks, fogged glazing or damaged seals before covering a skylight; a shade should never hide a maintenance problem. For a retrofit on a high ceiling, an installer with proper ladders or a scaffold tower is usually worth the cost, and should protect the floor and move furniture below. Once it is up, keep the label photo, manual and order confirmation together, and if a shade sticks, use that model’s troubleshooting guide instead of pulling harder on a tensioned mechanism. Stop using it if a rail or guide comes loose.

When quotes come in, compare them line by line: shade model and fabric, control type, remote or pole, mounting parts, electrical work and installation. A low headline price that leaves out the side channels or the pole is not the cheaper option.

If you are replacing an old skylight anyway, consider ordering the shade with it. VELUX pre-installs shades at the factory on its skylight systems, so the shade arrives fitted, and you skip a second trip up the ladder.

All guides